2022 Exmark Lazer Z E-Series LZE801CKA604A1
The perfect choice for professional landscape contractors who want the innovative engineering and commercial-grade quality of a Lazer Z zero turn riding mower, but in a value package. It features the same welded, heavy-duty, 1.5”x 3” tubular steel unibody frame found throughout our Lazer Z models. This unit features a Kawasaki engine paired with a generous 60" UltraCut Deck. A digital operator diagnostic module simplifies system monitoring and troubleshooting, while the fuel gauge uses ultrasonic waves to provide a more accurate reading. Comes equipped with a full-suspension seat that enhances operator comfort.
Features may include:
Hydro Drive, Simplified- Our hydro drive system has no hoses to leak and just one easy-to-change belt. Only simple, annual maintenance is required. It also lowers the center of gravity for improved handling.
- With just four grease points that only need annual greasing, the Lazer Z delivers maximum performance with minimum maintenance. Greaseless spindles and only four grease points on the entire machine.
- Our one-piece body frame is a classic case of “less is more.” Because, fewer parts equal more strength. And, more durability. So, in the interest of accuracy, the Lazer Z’s unibody frame is actually a case of “less is way more.”
- Check vital functions at a glance on the digital screen. An electronic fuel gauge with low fuel warning on all Lazer Z units, battery voltage warning, hour meter and OPC safety switch monitoring make troubleshooting easy.
- This full-floating deck uses maintenance free spindle with a splined blade driver to stop bolt tightening on impacts. And, our patented bearing design on idler arm pivots only needs annual service.
- Deck and hydro belt can be installed without using any tools.
- 2022
- Exmark
- Lazer Z E-Series
- LZE801CKA604A1
- Zero-Turn Mower
- Kawasaki
- 852
- Series: V-Twin
- 3,750 RPM
- Heavy-duty canister air filtration system
- Fuel Indicator: Electronic Sender
- Gas Carbureted
- Engagement: MagStop electromagnetic 200-ft-lb clutch with spot brake
- Hydro-Drive | Description: Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
- Control: Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
- Lever-actuated disc brake.
- 24 x 12-12, 4 ply Super Turf®| Caster: 13 x 6.50-6, smooth-tread, semi-pneumatic.
- 24 x 12-12, 4 ply Super Turf®
- 12-volt battery with 15-amp alternator.
- Forward: 0–10.0 mph (16 kmph) | Reverse: 0–6.0 mph (9.7 kmph)
- Blade: Approximately 18,500 fpm.
- Tractor: Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
- Package: Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
- Casters: .50" thick caster yoke arms.
- Blade Cutter Housing: 7.75" | Blade Shaft: 25mm (.98")
- Deck: 60"
- 72.8 in. (184.9 cm)
- Blades: 3 Blades at 20.50" | 83.1 in. (211.1 cm)
- Cutting: 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments | 70 in. (177.8 cm)
- 8-gallon (30.3-L)
- Deluxe, bolstered suspension seat with Elastomeric Vibration Control material. Adjustment: Fore and aft from Operators’ Position.
- Style: Floating | Style Description: Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch. | 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
- 412380711
- Fabricated
- Kawasaki
- $11,495.00
- Grand Forks
- Pre-Owned
- 3204
- 2022
- Exmark
- Lazer Z E-Series LZE801CKA604A1
- Red
- Kawasaki
- 25
- Gas
- Available
- 72.8 in. (184.9 cm)
- Cutting: 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments | 70 in. (177.8 cm)
- 412380711
- Fabricated
- Kawasaki